So after installing the R&G sliders I found that my old track stand is not tall enough to lift the rear tire! Can't seem to find a taller track stand.....any suggestions?
|Meant to include pics earlier. Same happened to me, so I used 2X6|" boards, in a U shape which I held together with hinges to save storage space. Just place it in front of wheel. Loose side pieces would work but I wanted it to not slide or move angularly as I raise the bike. The nominal 2" board thinkness (1 5/8) was enough rise for my stand, you may need more depending on your stand's vertical height to the pickup points.
See below pics