Honda Africa Twin Forum banner
  • Hey everyone! Enter your ride HERE to be a part of July's Ride of the Month Challenge! Theme: Drop it like it's hot!
1 - 4 of 4 Posts

·
Registered
Joined
·
295 Posts
Discussion Starter · #1 ·
Can someone please tell me if the handlebar bolts are M8 or M10. I am looking to add a ram ball mount and need to know which size. I am loathe to undo the bolts as it seems from another topic a bit of a faff to get them just right. If someone has the correct tightening procedure and torque settings that would be a great help.
 

·
Registered
Joined
·
41 Posts
Hi,

Maybe who has service manual for crf1100?
Are the same settings for CRF1100 upper handlebar holder socket bolt? Quantity 4. THREAD DIA 8mm TORQUE N·m 32 (3.3, 2)
 

·
Registered
Joined
·
743 Posts
ROTFL.
Loosen. Move bars. Tighten. Use Allen wrench.
If clamp is centred (gap both sides) before you start the do the same as you tighten.
If clamp is flush one side and gapped on the other, tighten the flush side first.
Dropped your bike? Move bars to steering lock and reef on them to realign rubber mounts in risers and get bars perpendicular to front wheel.
I’ve never used a torque wrench on bars. I do use torque wrench most other places.
 
1 - 4 of 4 Posts
Top