Honda Africa Twin Forum banner
  • Hey everyone! Enter your ride HERE to be a part of July's Ride of the Month Challenge! Theme: Drop it like it's hot!
1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I read that a lot of people have made changes to their REAR rebound setting...

...where the heck can I find it on my 2016 twinny??

I've checked the manual but can't find it. I have no idea what to look for either, other than something similar like the front rebound screw? My settings are a mess and I am in desperate need of fine tuning.

Many thanks in advance!
 

·
Registered
Joined
·
437 Posts
This is what my haynes has to say.

rebound Damping adjustment is made by turning the adjuster on the bottom of the shock absorber on the LHS using a flat-bladed screw driver.
To increase the damping, turn the adjuster clockwise. To decrease damping turn it anti clockwise. To set the standard position, turn the adjuster clockwise until it stops, then turn it anti clockwise 11 clicks. on 2016/17 models. 9 clicks on 2018-on standard models and 13 clicks on the adventure sports model, so the adjuster aligns with the index punch mark on the shock absorber.

 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 · (Edited)
@Motobiker many thanks!! My Honda Shop Manual does not mention this unfortunately. I can't believe I missed this screw over and over again thinking it was part of a mounting bolt -_-
 
1 - 3 of 3 Posts
Top