[rustynut2]

I had this on my klr. The rear wheel is not adjusted evenly.. Pulls to the right if the back wheel is pointed slightly to the left (If I remember correctly). Made a tool to measure from the swingarm pivot to center of axle bolt. Checked both sides and fixed the difference.

 

[rustynut2]

I replaced my Bridgestone 41’s front for the mission tire, no longer pulls to the right. Don’t know if it was the tire or the front mount. 1000 mile road trip and tracks straight. Too soon to tell really as I have lots of gear on the bike.

 

[rustynut2]

I agree with the front tire set-up. I changed to a 50/50 tire and after installing it my pull is much better. Wind and road camber is all I notice now. I did measure the rear adjusters with a micrometer to verify the best I could, as long as the machining was done right.