I bought new boots, Sidi Adventure 2. But then needed to adjust the lever position to give a wider gap. It was easy. I just undid the bolt holding the arm onto the gearbox, pulled it off, put it back on a few notches along. I didn't adjust the length of the main rod, as the upper lock nut was too tight. However, this seems to have significantly improved gear change, even compared to when using smaller boots. I know get perfect changes every time, and can more precisely select neutral.
Big, and very comfortable, boots.
![Image]()
Repositioned lever. Only the bolt at the top needed undoing.
![Image]()
Big, and very comfortable, boots.
Repositioned lever. Only the bolt at the top needed undoing.
