Honda Africa Twin Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello All

After twelve years with my (not mine anymore) Suzuki Bandit 1200 GSF/S, last month I picked up a '17 plate CRF1000A manual, it only had 1300 miles on it. I intend to add some more.

First thing I did is swap the seat for the Low Seat. I have the original if anyone is interested?

What next:
Add a Scott-Oiler and my Garmin SatNav. Are there any recommendations regarding from where to take the power; I had only fitted it to my old Bandit last summer and took the -ve feed from the tail light. What's easiest on the AT? I'll probably add a 12V Auxilliary socket too.

I have also ordered the Givi Trekker topbox and side cases too.

I might upgrade the horn.

Cheers
Steve
 

·
Registered
Joined
·
244 Posts
If you want to install the 12V aux wear its supposed to go on the dash, you'll have to basically take the bike appart. I removed the tank and ran a USB cable from the battery to the frame and there's a connection 4 inches from the USB port where I can separate and plug in my batter tender. Works fine and "only" had to remove the tank instead of taking the front end apart. Enjoy your new acquisition! :)
 
1 - 2 of 2 Posts
Top