Honda Africa Twin Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
120 Posts
Discussion Starter · #1 ·
Hi I am in the middle of doing some work on my AT and It looks as though I am going to have to undo the Swing Arm in order to remove the shock.

Does anyone know what the correct torque setting is for the swing arm pivot bolt?

Alternatively has anyone managed to remove the shock assembly without moving the swingarm back? I cant get it out of the gap left when I undid the shock bottom assembly.
 

· Registered
Joined
·
120 Posts
Discussion Starter · #5 ·
If you've not discovered already and according to the workshop manual you don't need to remove the swingarm just lift up slightly...
Yep we found that just before we undid the swing arm, much easier.

You don't know the torque settings for the triple clamps on the front forks do you I need to adjust them as well.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top