Honda Africa Twin Forum banner

Help! Trying to install back the Fairings 2019 Honda AT

538 Views 4 Replies 5 Participants Last post by  akitatwin
Hi!

I removed both the fairings on my 2019 Honda AT and have two questions:

1. The black rubber gasket/washer below fell out and I am not sure where it needs to be put back.
2. Could someone please send a picture of the section shown below in the second picture?


Ramjee
Wood Table Gas Rectangle Circle

Vehicle Automotive design Motor vehicle Automotive exterior Automotive fuel system


Thanks!

Ramjee
See less See more
2
1 - 5 of 5 Posts
Found a pic, maybe from one of the locations circled? Possibly on the bottom of the tank, left in pic, looks like you may have tape or something over the location.

Font Auto part Drawing Automotive design Art
See less See more
  • Helpful
Reactions: 2
On that fairing there is a push fit rubber . on the back of the fairing is a post that goes through it . I always put a little lubricant on it to stop it being pushed through when refitting the fairing
  • Helpful
Reactions: 1
On that fairing there is a push fit rubber . on the back of the fairing is a post that goes through it . I always put a little lubricant on it to stop it being pushed through when refitting the fairing
Yup...rubber grease.


Thanks again @Cuchulainn. I think this can will last me and my grandkids a lifetime.
Window spray should also do fine as a rubber lubricant, that's how I change tires
1 - 5 of 5 Posts
Top