Honda Africa Twin Forum banner
1 - 3 of 3 Posts

11 Posts
Discussion Starter · #1 ·
Im sure you guys see this alot but heres mine.

Had a piece of 3/4in (ish) aluminium plate lying around so I slapped it on the rear with worm gear tube clamps and got a $30 HF hard case and bolted it to the plate. The pre drilled holes around the outer edge are perfect size for straps.

I tested the mounting by grabbing the plate and lifting it and moving it side to side. It's going no where.


1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.