[Grumpyberg]

I imagine it's going to be a simple fix
I picked up my AT yesterday and noticed that the trip always reads in the negative (-) I recall from DR 400 I used to ride that this was some form of enduro countdown thing but as I'm waiting for my owners manual I don't know how to set it to read normal ( or it could well be that this is normal ?)
I have an RNS Tripmaster but cannot imagine that I would benefit from fitting it for the riding I do unless I'm going to be stuck with this - trip thing

 

[stormy1954]

Don't know about your problem but you can get User Manual here:

https://www.dropbox.com/s/isp3wolttsjkfwn/AT User Manual EN.pdf?dl=0

 

[Mudslinger]

That's a countdown, if you know your next turn is about 5 miles away, you set it to 5 and when it counts down to "0" you know your turn is close so you don't miss your turn. there is also the traditional trip "A" trip "B" displays.

 

[Grumpyberg]

Many thanks Gents

 

[WazerKrk]

so then I set it on every turn?

 

[Flyer]

It is not something you would set "on the go." It takes going through a menu and it is at the end of the menu. I am just going to use it initially to count down the 300 mile break in and then I will use it to count down to service intervals.

Cheers!