Honda Africa Twin Forum banner

21 - 24 of 24 Posts

·
Registered
Joined
·
84 Posts
<BTW, My light is wobbly as well>
I cut lengths of rubber fuel hose, slit them lengthwise on one side, slid them over the edges of the plastic surrounding the taillight above and below. No more wobbly. Here's pix of my AQ kit from an older thread.
 

Attachments

·
Registered
Joined
·
3 Posts
Greetings guys. Brownthecloun, as I observed the pictures of your bike in the tidy tail posts, I have noticed a curious thing. You have the rear fender plastics from the <=2018 AT, but your exhaust is from the 2016-2017 models. I happen to have an 2017 AT, and I want to do what you did with yours. Can describe what do you bought and did?

Best regards and better adventures
 

·
Read Only
Joined
·
20 Posts
No, I'm sorry, I wasn't referring to the work you've done but the factory license plate light. On my bike it is really loose and was just wondering if you could determine why this is the case since you've had this section removed and could see behind it.

It's rubber mounted like most of the current Honda range with the same lamp,
 
21 - 24 of 24 Posts
Top