Honda Africa Twin Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
134 Posts
I just saw some at NAPA auto parts last week they were on a rack at the end of an isle and I remember thinking NICE now I know where to get some if I loose one. They have different sizes but I don't know our size sorry. SO if you have a napa store in your area check it out.
 

·
Registered
Joined
·
52 Posts
I think this is what you're looking for:

Clip, Bumper Seal, aka push rivets

http://www.powersportspartsmart.com/oemparts/p/honda/90116-sp0-003/clip-bumper-seal

Here's a link to the fairing exploded view:
http://www.powersportspartsmart.com/oemparts/a/hon/5702d20c87a8660f4c83bdba/front-cowl

I'm sure you can find them cheaper. I got a pack of 10 for $5 when I ordered my PC-8 from Eastern Beaver, but if that's all you're going to get from Eastern Beaver I don't think it's worth it because he's shipping from Japan.

-steve
 

·
Registered
Joined
·
166 Posts

·
Registered
Joined
·
97 Posts
Just disassemble something random and then reassemble it.
At the end you'll have some bolts and pins which you forgot to put in. ;)
Those will be your spares got the next repair.


Problem solved!
 

·
Registered
Joined
·
384 Posts
Snoop around ebay for some push pins. I was able to find a bag of 50 for like three bucks. Came from China in about 18 days. Most of the listings have dimensions for each.

Here is an example: http://www.ebay.com/itm/10-Pcs-10mm-Honda-Clips-Plastic-Push-Type-Rivet-Retainer-Fastener-Bumper-Pin-/111869733105?fits=Make:Honda&hash=item1a0bf4a8f1:g:puEAAOSwxN5WV8ZL&vxp=mtr
These are not the right part they are different to the plastic rivets. The rivets are push to lock and push to unlock, these are push pull but have a similar function. You can buy the originals from a Honda shop, or Rugged Roads as in another post,
 

·
Registered
Joined
·
50 Posts
Rocky Mountain ATV has them, you can get OEM or Tusk.
Part# 1455640002
6mm push style

I can't post a link, so will have to look yourself.
 
1 - 13 of 13 Posts
Top