[zmcut]

Hello, Anyone changed brake pads on front or rear and what brand of non OEM pads were used? Thanks.

 

[EmmEff]

I just installed EBC Double-H Sintered brake pads on the rear of my 2020 AT AS. Haven't really been able to try them though because of my brake bleeding issues so I cannot comment on actual use.

 

[zmcut]

Hello, Anyone changed brake pads on front or rear and what brand of non OEM pads were used? Thanks.

Thanks EmmF. Any chance you have the SBS part numbers?

 

[zmcut]

Thanks EmmF. Any chance you have the SBS part numbers?

Sorry the EBC part numbers😁

 

[EmmEff]

FA174HH

 

[zmcut]

FA174HH

Thanks EmmEff

 

[Nomadic_adv]

Ferodo Racing has a good guide with competitor cross-reference part numbers. I usually run Ferodo ST SinterGrip pads on street bikes but went with EBC FA679HH front and FA174HH rear on my 18 ATAS just because they are easy to find and less costly. Same pads front & rear for all years AT..

Ferodo Racing Official Website - Brake Pads & Shoes

 

[black99S]

Hello, Anyone changed brake pads on front or rear and what brand of non OEM pads were used? Thanks.

I use Honda OE pads.. 45,000km and still life left on the 2nd set.

 

[caridinaintruder]

I use Honda OE pads.. 45,000km and still life left on the 2nd set.

How long did you do with your first OEM rear pad? Mine is about done in about 5000km, meaning I get about 17000km on the first rear pad. If you get this much km's on the rear pad, I almost start second guessing the quality of the rear pad I got from factory.

 

[black99S]

How long did you do with your first OEM rear pad? Mine is about done in about 5000km, meaning I get about 17000km on the first rear pad. If you get this much km's on the rear pad, I almost start second guessing the quality of the rear pad I got from factory.

Swapped out the rear at ~25Kkm. I use the rear a lot in slow speed stuff and to stabilize the bike when braking on the road, but most of my braking force is always the front brakes either on the road or on gravel.