Honda Africa Twin Forum banner
  • Hey everyone! Enter your ride HERE to be a part of August's Ride of the Month Challenge!
1 - 9 of 9 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Hello everyone,

I haven't found the measurement between the footpegs and the seat. It looks like the footpegs may be a tad high and make for cramped legroom. Anyone see this measurement? I'm also wondering what bikes may have the same measurement. I guess I may have to wait for the bike tests to start coming in.

Thanks,

Davo
 

·
Registered
Joined
·
274 Posts
Hello everyone,

I haven't found the measurement between the footpegs and the seat. It looks like the footpegs may be a tad high and make for cramped legroom. Anyone see this measurement? I'm also wondering what bikes may have the same measurement. I guess I may have to wait for the bike tests to start coming in.

Thanks,

Davo
Well...ground clearance is 9.8 inches and seat height is 34.3 inches. Roughly lets say 24.5 inches, give or take half an inch or two...

http://www.africatwinforum.com/foru...rica-twin-returns-official-specs-details.html
 

·
Registered
Joined
·
197 Posts
Photos of the CRF-AT make it appear as though the foot pegs sit ~2 1/2" higher than the bottom of the bike, so that would leave 22" as your seat to foot peg distance. If I recall correctly, the distance on my 2003 Vstrom 1000 was 21" and (I just measured) that's the same distance as my 2013 NC700XD.

Try cycle-ergo.com to get an idea of how you might fit the CRF-AT (use a bike like VStrom to simulate the CRF-AT ergo's but drop the foot pegs an inch). It's a very flexible system.
 

·
Registered
Joined
·
25 Posts
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top