[Bonehead]

What is the best way to approach fitting the protective film on to the TFT without getting bubble

 

[Hood]

What is the best way to approach fitting the protective film on to the TFT without getting bubble

Get a Brotect Air Glass one Easy to apply and no bubbles. Only thing is for some reason the lower one doesn't fit now, or at least not on mine. It was fine on my 2021 but the 2022 model seems slightly different.

Mine.

 

[Bonehead]

Thanks, they gave me the OEM protector when I got the bike, thought I would try to fit that one.

 

[Hood]

Thanks, they gave me the OEM protector when I got the bike, thought I would try to fit that one.

Ha ha get the Brotect ordered and then by the time you have stopped swearing at the oem one you should have it through your letter box
The film type (oem) are hard enough to put on phones bubble free never mind stretching over handlebars

 

[Bonehead]

Ok I don't want any bubbles, what makes the Brotect AirGlass different or better to the OEM

 

[DoubleThumper]

Some modern scratch-resistant polymer aftermarket offerings appear to perform very well. Even with a few impossible bubbles, the product says they do go away - and that is exactly what happened before the summer season.

A smudge, scratch-free and glare-free result was unexpected.

No complaints.

Cost: ~$7.25 U.S.

 

[Hood]

Ok I don't want any bubbles, what makes the Brotect AirGlass different or better to the OEM

It is made of very thin glass. If you make sure there is no dirt or dust specs on the screen you just position it above, press down on a side and let the rest go and it will go on perfectly as you look on in wonder at the air getting pushed out

If you screw up and you are careful you can take off and try again.

 

[Hood]

I have been using them on my phones for years, wouldn't go with anything else now.

https://www.protectionfilms24.com/documents/video/produktvideo_englisch.mp4

 

[Bonehead]

They offered to fit the screen when I picked the bike up but warned to expect a trapped bubble. I will order a Brotect

 

[Hood]

They offered to fit the screen when I picked the bike up but warned to expect a trapped bubble. I will order a Brotect

Try and see, you may get lucky

Have a bank card or similar ready and if you get bubbles you can sometimes squeeze them out with the card. You have to make sure it is extra clean and especially dust free when you try, same applies with any protector really but more so with the film ones.

 

[Bonehead]

I tried, its rubbish and its in the bin

 

[Jetro]

I just ordered Speedo Angels tempered glass, anti-glare screen protector.
It is a matte glass, really thin. Idk how it perform as I'm waiting for my AT.
Will let you know as soon as I get it

OT: What does "ES" stand for in AT's description?

 

[Bonehead]

ES is electric suspension