Honda Africa Twin Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi, after reading this forum and watching some youtube footage, I have removed the front fairing, located the accessory terminal only to find what should be the dummy plug end is filled with 4 wires? I can only assume these are the feeds for the factory fitted heated grips we have on the adventure pack. I would really like to hard wire our TomTom rider in without relying on the 12v charger. where do I go from here, without splicing or heading back to the accessory terminal under the seat? Any help would be gratefully received.
Many Thanks Chris
 

·
Registered
Joined
·
479 Posts
Chris

see if the dealer used the Honda Splitter cable. (08U74-MJP-G50) as in picture. If not purchase this, (£38 UK) and plug that into your accessory terminal instead of what is already plugged in. That will bring out the four way wiring to which you can plug in your heated grips again. It also leaves you with a 2-wire accessory socket which you can use for other things. That is actually designed for Honda power socket but you dont have to use it as such of course.
 

Attachments

1 - 2 of 2 Posts
Top