Honda Africa Twin Forum banner
  • Hey everyone! Enter your ride HERE to be a part of July's Ride of the Month Challenge! Theme: Drop it like it's hot!
1 - 3 of 3 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
Previous owner of the '18 AT I bought did a DIY fender eliminator job and I would like to put the rear of the bike back to stock. Just looking for the plastic piece where the license plate mounts. Partzilla shows the ' 18 as having a different part number than the 16-17 so I probably need to limit my search to the ' 18-'19 version.
 

·
Keeping’em Moderatorated
2018 Adventure Sports DCT
Joined
·
2,976 Posts
Previous owner of the '18 AT I bought did a DIY fender eliminator job and I would like to put the rear of the bike back to stock. Just looking for the plastic piece where the license plate mounts. Partzilla shows the ' 18 as having a different part number than the 16-17 so I probably need to limit my search to the ' 18-'19 version.
2019
https://shop.trojanpowersports.com/...Motorcycles&make=Honda&year=2019&fveh=1689113

2018
https://shop.trojanpowersports.com/...Motorcycles&make=Honda&year=2018&fveh=1687297
 

·
Registered
Joined
·
577 Posts
Still lookin'?

Previous owner of the '18 AT I bought did a DIY fender eliminator job and I would like to put the rear of the bike back to stock. Just looking for the plastic piece where the license plate mounts. Partzilla shows the ' 18 as having a different part number than the 16-17 so I probably need to limit my search to the ' 18-'19 version.
Got one, if you're still interested.
 
1 - 3 of 3 Posts
Top