Yeah, the 08M70-MLN-EQ0 is the correct one for the 2024 ATAS. Available here in Canada. You could order one from webike if you can’t get one locally.

 

Thanks a ton for verifying this. And thank you for the link

 

Not sure why they are telling you it isn't available yet. I bought one and installed it on my 2024 AS ES DCT and it works just fine. It took about 4 days for them to get it in. I would try a different dealer.

 

I called 4 dealers and got the same info. None could order 08M70-MLN-EQ0

 

https://www.unitedmotorsports.com/oem-parts#/s/HOM//08M70-MLN-EQ0//1/y

 

thanks a million. I think I may order from this site, since its in the US

 

My dealer swears the 08M70-MKS-E00 is the right stand for the 2024 AS and guaranteed 100% refund if it isn’t, so I ordered one. Will know in the next day or so if it works…. Thanks for the updated # if it doesn’t!

 

I have MLN. Just haven’t gone to get it installed yet. The issue is the dealerships still aren’t showing updated 2024 part numbers yet, but they are overseas. Once I have him and 3 other dealers the MLN #, they all verified it was correct. Good luck. I’ll go get mine installed in a week or so. I don’t feel like dealing with that spring. lol

 

I installed the MLN on my 2024 ATAS MT. A bit tricky to install, but works great.

My notes say it was part # 08M70-MLN-EQ0, but the Honda website right now isn't showing me any part number.

 

Just installed the 08M70-MKS-E00 stand on my 2024 AT AS DCT. Note this is the stand that above comments says the wrong one, but my dealer said it was the right one and it has every appearance of being the right one. Picks the bike up properly, all the bumpstops hit correctly, all clearances are good. don’t know if Honda just changed the number for the hell of it (seen them do that before) or if there is some minuscule difference that I can’t see and therefore do not care about.

Note the biggest problem that the online instructions (none came with the stand) referenced was loading the springs. This is not difficult if you can build a hook and lever arrangement has shown in the second picture below. Use the back of the shock mount for a lever point (aka fulcrum) and make sure you pad it.

 

As long as it works for you. But it isn’t the correct one. MLN is the correct one. The issue is that most US dealers only show MKS and it confuses them. It’s working for you, and that’s all that matters. But yours is different than mine. Your pic is diff. But it works, for you, then cool!! But the newer one is shorter. The ATAS is lower to the ground, as you know. The two center stands have design differences. Yours looks nothing like mine.

All 3 of my local dealers ending up telling me that MKS was wrong, even though they admitted to being confused. Then they all came back with the same info —MKS is not listed for 2024 ATAS, but for previous, before the 19 inch wheel and lowered suspension. They all found MLN and offered to order it. Wait a few months for all the US part numbers to update, and your dealership will tell you it’s MLN

yeah I paid for install. I’m never doing another center stand. I’d rather pull an engine. 😂😂. That’s just me. I’ve done them, and I don’t enjoy doing them.

 

The 2024 ATAS has lower suspension/ground clearance so likely the new stand is shorter than the previous one.
It would be interesting to see what the difference is in height of the rear tyre off the ground on yours compared to someone with the new part number stand.

 

The 2024 ATAS has lower suspension/ground clearance so likely the new stand is shorter than the previous one.
It would be interesting to see what the difference is in height of the rear tyre off the ground on yours compared to someone with the new part number stand.

It definitely is! Mine is installed and it’s the new part number, not the one from last year. I got to see another AT at the dealership with the MKS part number and it’s definitely taller and is also designed differently. I have the new part number and the rear tire is NOT very high off the ground, much like my Gold Wing. High enough, but not way off the ground. I have small hands and can’t stack two fingers on top of each other and slide under my GW or ATAS (with new part number) rear tires. So to me, its height is perfect. Last year/model stand would have it higher, as you noted.

 

With it parked behind my car, in the garage, and it’s raining—I can manage these for now

 

Thanks for those but if you could manage one tomorrow with the stand up, so I can see how it sits with respect to the pillion pegs, that would be excellent.

 

Will do.

 

They are great, thanks.
Will have to try and compare to my cut down stand as it was almost touching the rear pegs and no way I could get my foot in so had to shorten it.
Having said that mine is not an oem Honda one but the pics should give me some references.
I may just go for the new oem Honda stand instead, we will see but again thanks for taking the images.

 

I’ll concede the point, my rear tire is farther off the deck than the ones you guys are showing - they appear to be ~1” whereas mine is a little under 3”. Still not difficult to get on the stand, and I’m a relatively short person. Trying to figure out now if it’s worth the effort to unload the springs and swap the stands….

 

The proper part number for the 2024 ATAS is on the Honda website here in Canada and shows the difference in their 2024 accessories catalog. Seems odd that the customers have to instruct the dealers on their own products.

 

The US honda powersports website now features the 24 MY AT accessories should you need to track down part numbers - https://powersports.honda.com/accessories

 

Only goes to 2022 model for Africa Twin, while going up to 2024 in other 2 wheel Honda motorcycles

 

If someone who has the 2024 on ATAS stand could measure the length of it for me I would be grateful, see pic of dimension I am meaning.
I am going to buy a new oem stand and I am thinking maybe the 2024 onwards ATAS stand would do me seeing as I have lowered my bike but don't want to buy just to find out it is too short.

 

Я был бы признателен, если бы кто-нибудь, у кого есть модель 2024 на подставке ATAS, измерил для меня её длину. См. фото, чтобы понять, о каких размерах я говорю.
Я собираюсь купить новую стойку OEM и думаю, что, возможно, мне подойдёт стойка ATAS 2024 года и новее, так как я опустил свой велосипед, но не хочу покупать её только для того, чтобы потом оказалось, что она слишком короткая.


[ВСТАВКА=полная]92356[/ВСТАВКА]
[/ЦИТАТА]
примерно: от середины отверстия до края ножки 325–330 мм
08M70-MLN-EQ0
Я хотел бы узнать длину MKS