So here is my version of the left hand rear Brake....
What other junction did you use? I intend to do away with the foot brake and its master cylinder altogether and link in the hose from the lever to the hard pipe going into the ABS unit.I modified my 2020 ATAS DCT the same way as whoissokol, After that some issues emerged. When pressing handlebar rear brake lever, brake acts too soft and slow compared to foot lever. When pressing foot lever there is an increased backpressure in the hand lever .
Any idea what could be wring in the system. Only difference to whosisokol's modification is the we used another junction, not the shown Ho Hey.
Thanks